Coatings
Transfer foil is constructed of a lot of different special coating layers.
While WASHIN manufacture our foil by self-developed materials, most foil manufacture get materials from other manufactures and stuff for products.
Develop coating materials and manufacture original foil with them, and develop new one again.
That iterative process gives us new chance to extend our technology.
WASHIN has a big advantage in that we have an exploitation technology of special coating with full knowledge of converting.
WASHIN COAT, a coating material for converting, attends to every need of foil development with a huge variety of product for each layer.
Further more, we apply our technology of coating material for foil to a fuctional film to meet market needs more and more.
The converting world is segmentalized and upgraded in the future.
In such situation, WASHIN COAT proposes useful products and technology to the converting market.
This catalog show only product lineup of WASHIN COAT.
If you have any question about detailed product information, please feel free to contact us.
WASHIN COAT TFH Series : Coating material for transfer foil
It is developed for in-molding foil which is used for the molding system of simultaneous transcription.
We assort a set of product required in release layer, UV hard coat layer, various middle layers, and sizing layer.
Every product is able to select and combine according to your requirements.
Use | Type | Product name | Feature | Solid content |
Release layer | two-pack | TF - 1001 | good adherability to film | 10.0% |
CAT - 1 | 75.0% | |||
one-pack | TF - 1101 | gas cushion | 0.6% | |
one-pack | TF - 1201 | light release type | 5.0% | |
one-pack | TF - 1202 | good solvent resistance | 10.0% | |
Release layer | one-pack | TF - 1101 | gas cushion | 0.6% |
one-pack | TF - 1102 | good surface slippery | 2.5% | |
one-pack | TF - 1103 | overstampability | 3.1% | |
Release layer | one-pack | TF - 1201 | light release type | 5.0% |
one-pack | TF - 1202 | good solvent resistance | 10.0% | |
one-pack | TF - 1203 | better definition | 14.3% | |
Protective |
| TFH - 2001 | foil for plastic / for coloring | 47.0% |
CAT - 2 | 97.0% | |||
| TFH - 2002 | foil for paper / for coloring | 50.0% | |
CAT - 2 | 97.0% | |||
Corrosion prevention layer | one-pack | TF - 4001 | corrosion prevention | 5.0% |
Sizing layer | one-pack | TFH - 5001 | for styrene substrates | 28.0% |
one-pack | TFH - 5002 | 36.0% | ||
one-pack | TFH - 5003 | 36.0% | ||
one-pack | TFH - 5004 | for PET / UV thermal | 20.0% | |
one-pack | TFH - 5005 | for PMMA / PC / second surface foil | 34.0% | |
one-pack | TFH - 5006 | for PP substrates | 14.0% | |
one-pack | TFH - 5007 | 11.0% | ||
one-pack | TFH - 5008 | for general plastic | 16.0% | |
one-pack | TFH - 5009 | for multi-color printing foils | 19.0% | |
one-pack | TFH - 5010 | for UV / thermal hardening varnish | 31.0% | |
one-pack | TFH - 5011 | for PE / PVC substrates | 14.0% | |
one-pack | TFH - 5012 | for PET / substrates | 22.0% | |
two-pack | TFH - 5013 - 1 | for laminated PP / general coated paper | 45.0% | |
TFH - 5013 - 2 | 18.0% |
WASHIN COAT TFM Series : Coating material for special transfer foil
It is developed for in-molding foil which is used for the molding system of simultaneous transcription.
We assort a set of product required in release layer, UV hard coat layer, various middle layers, and sizing layer,
Every product is able to select and combine according to your requirements.
Use | Type | Product name | Feature | Solid content |
Release layer (one layer) | two-pack | TF - 1001 | film adhesion type | 10.0% |
CAT - 1 | 75.0% | |||
one-pack | TF - 1102 | good surface slipping property | 2.5% | |
UV hard coat layer | two-pack | TFM - 2101 | heat-precure / post UV cure type | 53.0% |
CAT - 3 | 0.5% | |||
one-pack | TFM - 2102 | heat-precure / post UV cure type | 33.0% | |
First primer layer | two-pack | TFM - 3101 A |
| 40.0% |
TFM - 3101 B | 37.0% | |||
| TFM - 3102 A | Improvement of adherability to hard coat layer | 40.0% | |
TFM - 3102 B | 33.0% | |||
| TFM - 3103 A |
| 40.0% | |
TFM - 3103 B | 35.0% | |||
Second primer layer | one-pack | TFM - 3201 | Good Printability | 29.0% |
Primer layer for metalization | two-pack | TFM - 3101 A | yellowing type | 40.0% |
TFM - 3101 B | 37.0% | |||
two-pack | TFM - 4101 A | yellowing type | 35.0% | |
TFM - 4101 B | 34.0% | |||
two-pack | TFM - 4102 A | non-yellowing type | 40.0% | |
TFM - 4102 B | 25.0% | |||
Anchoring layer on metalization | one-pack | (TFM - 5101) | good adherability to metalization | 30.0% |
one-pack | (TFM - 5102) | chlorine - free type | 20.0% | |
Sizing layer | one-pack | TFM - 5101 | good adherability to substrates | 30.0% |
one-pack | TFM - 5102 | chlorine - free type | 20.0% | |
one-pack | TFM - 5103 | chlorine - free type | 32.0% |
WASHIN COAT MP Series : Coating for special metalized PET Film
It is developed for metalized PET film for metalic yarn.
It is superior in adhesion to the surfece of PET film and that of metalization layer.
It is anabled to use for purpose other than metalic yarn, because it has properties to endure hard circumstances.
Example: launderability
Metal | Type | Product name | Feature | Solid content |
Al | one-pack | MP - 6001 | for coloring | 45.0% |
one-pack | MP - 6002 | for coloring | 46.0% | |
one-pack | MP - 6003 | corrosion prevention of aluminium materialization layer | 29.0% | |
| MP - 6004 A | for deep color | 36.0% | |
MP - 6004 B | 43.0% | |||
| MP - 6005 A | for metallic yarn / post-staining resistance | 36.0% | |
MP - 6005 B | 43.0% | |||
CAT - 5 | 30.0% | |||
| MP - 6006 A | low-formaldehyde | 55.0% | |
MP - 6006 B | 34.0% | |||
three-pack | MP - 6007 A | for metallic yarn / high pressure staining resistance | 64.0% | |
MP - 6007 B | 33.0% | |||
MP - 6007 C | 34.0% | |||
additive | ADD - 1 | add slippery | 37.0% | |
additive | ADD - 2 | add slippery | 10.0% | |
Ag | one-pack | MP - 6101 | transparent coat | 25.0% |
one-pack | MP - 6102 White | white coat | 16.0% | |
| MP - 6103 A | transparent coat | 40.0% | |
MP - 6103 B | 30.0% | |||
three-pack | MP - 6104 A | transparent coat | 15.0% | |
MP - 6104 B | 22.0% | |||
CAT - 4 | 50.0% | |||
three-pack | MP - 6105 | white coat | 31.0% | |
MP - 6105 White | 25.0% | |||
CAT - 5 | 30.0% |
WASHIN COAT: UV Coatings for Cosmetic Containers
Polyster UV Top Coating
Use | Base material | Product name | Feature |
Finishing | AS / ABS | POLYSTER UV C-231 CLEAR | hard coat |
POLYSTER UV C-252 CLEAR | good stampability | ||
POLYSTER UV C-254 CLEAR | semi-hard for plastic | ||
PET | POLYSTER UV C-352 CLEAR | semi-hard for PET | |
Frost fiishing | AS / ABS | POLYSTER UV F-256 MAT | frost finishing |
PET | POLYSTER UV F-355 MAT | frost finishing | |
Special functionality | AS / ABS | POLYSTER UV C-721 CLEAR | anti-pollution |
AS / ABS | POLYSTER UV C-733 CLEAR | anti-finger print |
Polyster UV Under Coating
Use | Base material | Product name | Feature |
Basecoat | - | POLYSTER L-100 CLEAR BASE | one-pack basecoat |
| PP | POLYSTER L-140 PP primer | halogen - free |
PET | POLYSTER L-130 PET primer | primer for PET |
Polyster UV Coating for Metalization
Use | Base material | Product name | Feature |
| AS / ABS | POLYSTER UV C-872 CLEAR | topcoat for metalization |
AS / ABS | POLYSTER UV C-891 UNDERCOAT | basecoat for metalization |
Polyster Thinner
Use | Base material | Product name | Feature |
Thinner | - | POLYSTER UV No.25 Thinner | mild solvent type |
POLYSTER UV No.33 Thinner | UV paint for PET | ||
POLYSTER No.101 Thinner | dedicated / L-100 clear base | ||
POLYSTER No.141 Thinner | dedicated / L-140 PP primer | ||
POLYSTER No.131 Thinner | dedicated / L-130 PET primer |
关闭返回